Tronics S1000 Stand Alone Pressure Sensitive Labelers
Our Tronics S1000 Stand Alone Pressure Sensitive Labelers were developed for those customers who want all the durability of our Series 3 Premier labelers, but are doing more straight-forward simple products.
The Tronics stand alone pressure sensitive labeller is ideal for simple flat panel and promotional spot labeling applications. In addition, if changeover is not frequent and you will be running the same or very similar products all day long, then this may be the best fit for your organization.
Although economical, the Tronics S1000 Stand Alone is NOT your typical “Cheap Head-On-A-Stick” pressure sensitive labeler. In fact, this extruded aluminum frame supports Tronics standard Series 3 Premier label head rated at 30 metres per minute. This means that the Stand Alone can be upgraded into a Series 3 at a later date.
Label reel core size 76mm inside diameter
Label reel outside diameter 335 maximum
Label size vertical 15mm – 215mm
Label size horizontal 20mm – 999mm
Label gap size minimum 2.5mm
Label stop accuracy +/- 0.5mm (on dispensing edge)
Right and left labelling heads
Height adjustment side 870mm – 1185mm
Height adjustment overhead 900mm – 1050mm
Horizontal adjustment 0mm – 150mm
Tilt adjustment +/- 8 degrees