Tronics Heat Transfer Labeller

Heat transfer labelling or decorating combines the convenience of pressure sensitive labelling by changing over using a roll of labels with the high gloss, photo quality, and durable finish of offset printing.


Equipment Offerings

Tronics offers several standard HTD machinery configurations and specializes in heat transfer label equipment for large containers, 5 litres and larger.

Air, Electrical, Other Specifications for Tronics HTD System.

Streamlined Integration

Tronics has experience with tying these labeling systems in with other equipment upstream to form integrated turnkey systems, including in-line with injection molding equipment. Integration with injection molding machinery is a huge benefit eliminating the additional costs of having to use multiple people to decorate, handling product multiple times from the molder, to warehouse, to offset printer, and not having load and unload the offset printer with multiple people. Finally, another benefit is that there is no clean up involved when using rolls of heat transfer labels.

Heat Transfer Label Systems for Changing Market

With the explosion in warehouse shopping such as SAMS Club, Home Depot, Lowes, etc… the average consumer is buying more bulk product than ever before which means that competition on the store shelf no longer applies to smaller retail container packaging only. Tronics’ heat transfer decorating (HTD) technology has helped give our customers that offer products in large containers a competitive edge with a fantastic looking product package.


Tronics S200 Benchtop Labeller
Maximum Dispensing Speed
Minimum Dispensing Speed
Label reel core size
76mm inside diameter
Label reel outside diameter
335 maximum
Label size vertical
15mm – 215mm
Label size horizontal
20mm – 999mm
Label gap size minimum
Label stop accuracy
+/- 0.5mm (on dispensing edge)
Height adjustment side
870mm – 1185mm
Height adjustment overhead
900mm – 1050mm
Horizontal adjustment
0mm – 150mm
Tilt adjustment
+/- 8 degrees
Single Phase 220/240 Volts @ 50/60 Hz 20-40 Amps. For pre and post flaming.
14 CFM compressed air @ 75-100 PSI.
Constant Supply at 250 Cubic Feet/Hour of Natural Gas @ 8-13” W.C. Pressure.
Qty 1 fully detailed manual plus one CD must be provided with every machine.
Manuals should include
Set up procedure, PM program, Fault identification and rectification, Wear part / spare parts list, Wiring diagrams, Services specifications electric, air, gas.
Web Sizes and Copy
The web size will be no larger than 9”wide, larger web sizes can be accommodated with a larger decorating head but will need to be evaluated on case-by-case basis.
A decorating speed of 4-5PPM (based on 5 gallon pail with 180 deg. Orientation and 100% wrap).
Machine finish
The machine finish is mild steel powder coated, including frame, & electronics enclosure, transfer deck will be stainless steel.
All necessary safety features such as machinery guarding and emergency stops etc will be provided.
Specifications for the HSHTD Labeling Machinery Same as above except
A decorating speed of 7-9 PPM (based on 5 gallon pail with 180 deg. Orientation and 100% wrap)
Specifications for the FSHTD Labeling Machines Same as above except
A decorating speed of 8-10 PPM (based on 5 gallon pail with flat sides) Tronics customers have found that our labeling systems provide the best solution at the best value found on the market today. Whether your application is unique or not.


Building products Industry by Application

Building Products

Chemical, Petrochemical & Household Industry by Application

Chemical, Petrochemical & Household Products

Distribution & Fulfillment Industry by Application

Distribution & Fulfillment

Ready to see if Tronics has the right solution for you?